unfinished

Unfinished flooring must be job-site sanded and finished after installation. Prefinished flooring is sanded and finished at the factory.

Acadian flooring center providing from 2 1/4'" to 3 1/4" width Unfinished planks White Oak, Red Oak, Maple, North American Cherry or exotic woods like Jatoba(Brizillian Cherry) can meet your requirement. If you want a custom stained hardwood floor, or a wood floor to match existing trim than a job-site finish is your answer.

Job-site finish means you start with a bare (unfinished) hardwood floor and than the floor is sanded, stained, and finished in the home.

The other advantage of a job-site finish is if you are concerned with uneven heights between planks, the sanding process will smooth out the floor.

Be warned, this can be quite a mess and the process does take several days.

Water Based Urethane:
Water is used as part of the chemical make up of the polyurethane finish.

Solvent Based Urethane:
Oil is used as part of the chemical make up of the polyurethane finish.

Moisture Cured Urethane:
A similar chemical make up as solvent based urethanes but, this finish needs the humidity (moisture) in the air to cure.

Acadian Flooring Center Ltd. has experienced professional with a good eye can finish your floor with the color you like.

OUR OTHER PRODUCT CATEGORY

• White Oak
  • Plain Cut
  • Riftsawn & Quartersawn
• Red Oak
  • Plain Cut
  • Riftsawn & Quartersawn
• Maple
• Walnut
• Hickory
• Jatoba
• Sucupira
• Santos Mahogny